SMX 506

Request a Quote

SMX 506

Description
Soudal SMX® 506 is a high quality single component glazing sealant with high adhesive strength. It is based on SMX® – technology, chemically neutral and fully elastic and has been approved according to ISO 11600 G 20 LM.
Characteristics
– High bond strength on nearly all surfaces
– Can be painted with most water based paints (see remarks)
– Excellent adhesion on glass, wood, metal and PVC
– Ecological advantages – free from isocyanates, solvents, halogens and
acids
– Flexible elastic rubber – movement accommodation up to 20%
– Straightforward application even in adverse conditions
– No bubble formation within sealant (in high temperature and humidity applications)
– Primerless adhesion on many substrates (consult our Technical Service for more details)
– Easy to tool and finish with soapy water
– Good extrudability even at low temperatures
– Colour stable and UV resistant
– Minimal health and safety considerations
Applications
Glazing sealant between glass and all usual frame materials: timber, aluminium, steel, PVC. Specially developed for use on self-cleaning glass(Bioclean® and Activ Glass®)

Directions for use
Method: Manual- or pneumatic caulking gun
Application temperature: +5°C until +35°C
Cleaning: White Spirit or Surface Cleaner immediately after application and before curing
Tooling: can be tooled with soapy solution before skin formation
Repair with: Same material
Remarks
– Soudal SMX® 506 can be painted with water based paints. However due
to the large number of paints and varnishes available we strongly
suggest a compatibility test before application
– Remove all traces of soap (tooling) because it will harm the adhesion of the paint onto the sealant
– The use of metal spatula or other hard tooling equipment on Self-cleaning glass is not recommended in order to prevent the damaging of the active layer of the glass
– We recommend the use of Soudaseal 215 LM for all perimeter joints (between wall and window profiles) in applications where Selfcleaning
glass is used
– SMX 506 should never be used in applications where stagnant water can occur. We therefore always recommend a minimum pitch of the substrates of 10°

Norms:
Soudal SMX 506 has been tested and approved according to:
– ISO 11600-G-25LM (IFT Prüfbericht 504 34673)
– ISO 11431 on SGG Bioclean and Activ Glass (IFT Prüfbericht 504 37029/1)